Sea Fox 248 Commander vs. Mako 254 CC
This page compares the Sea Fox 248 Commander and Mako 254 CC side by side — specs, price, fuel range, livewell, hull design, and warranty — written by Avalanche Motorsports, the #1 Sea Fox dealer in North Carolina. Both boats are available for sea trial in Washington, NC.
Quick Answer —Sea Fox 248 Commander leads on fuel range (109 gal vs ~96 gal), capacity (10 persons vs 8), and hull construction chemistry. NauticStar 242 OS offers a Lifetime Limited Hull Warranty and strong value at a slightly lower price. We carry both — call us and we'll match you to the right boat. If the 254 CC's engine size or fuel range is the deciding factor, the Sea Fox 268 Commander steps up to 400 HP max and a 150 gal tank at ~$120,000 ° worth a look before committing to the competitor. Or if you want to spend less, the Sea Fox 228 Commander covers most of the same water at ~$80,000 with the same lifetime hull warranty.
248 at a Glance

- F115
- F150
- F200
- F225
- F250
- Stainless steel bow eye with chafe plate
- Anchor compartment with rope storage locker
- LED navigation lights
- Curved bow backrest cushions
- Full cockpit coaming pads with integrated fold out forward facing bow backrests
- Under seat insulated storage & fishbox
- Casting deck with removable filler board
- Stainless steel recessed grab rail at bow
- In-floor storage with 5-gallon bucket
- Stainless steel table mount
- Removable bow filler cushion
- Forward console seating with contoured backrests
- T-Top with canvas awning, rear spreader lights, tulip rod holders (4) and LED anchor light
- White powder coat frame (black and gray powder coating also available)
- For Yamaha Mechanical Motors (Dometic SeaStar hydraulic steering system with tilt helm, two digital gauges with backlighting, tachometer and speedometer with volt, fuel, and push button functions)
- For Yamaha Digital Motors: (Multifunction instrumentation with tachometer, speedometer, volt, fuel, and fuel management functions, display may vary with availability, helm will vary with engine choice.)
- Wet Sounds Marine Stereo
- Six Wet Sounds marine speakers in deck
- Windscreen
- Top mount compass on console
- Console dash shroud
- Dash space for flush electronics (compatible for two 12" displays)
- Stainless steel steering wheel with turning knob
- Lockable console door
- Integrated console footrest with backlit lower level footrest
- 12-volt power point
- Battery switch
- Console courtesy lights
- Pre-rigging for two batteries
- Marine grade soft mat decking and console accents
- Leaning post helm seating with backrest and hinged bolsters
- Stainless steel compression latches
- Under gunwale recessed rod storage with powder coated toe-rail
- Stainless steel closeout rings for rod holders
- Cup holders (10)
- Stainless steel rod holders (4)
- Aft bench seat with removeable cushions
- Self bailing cockpit with stainless steel grates
- Aquarium style pressurized livewell with window (30 gallons, 800 GPH aerator)
- Livewell light
- Dip net with integrated easy access storage
- Stainless steel walkthrough gate
- Transom storage compartment - plumbed and insulated for use as a cooler and notched for beach anchor storage
- Raw water washdown hose with storage tube on aft bulkhead - 15' of hose with adjustable nozzle
- Fresh water washdown hose with storage tube on aft bulkhead - 15' of hose with adjustable nozzle. 12 gallon freshwater tank.
- Bulkhead fittings for hydraulic hoses in splashwell
- Stainless steel motor rigging flange
- Stainless steel transom saver
- Stainless steel rear boarding telescopic ladder with integrated boarding handle
- Marine grade soft mat deck accents
- Stainless steel through bolted grab rail
- Recessed electric trim tabs with integrated hull design
- Stainless steel U-bolts on port and starboard transom
- Marine fuel/water separating filter
- (2) 1100 GPH bilge pumps with built in electronic float switches
- Freshwater pump
- Raw water pump
- Composite hull & deck
- Isothalic gelcoat
- Vinyl ester barrier coat
- Sand-grip deck surface
- Stainless steel rub rail
- Stainless steel fasteners
- Stainless steel through hulls
- Stainless steel pull-up cleats (6)
- Silver boot stripe available on white and full hull gelcoat options
- Limited Lifetime Hull Warranty

254 CC at a Glance
- MAKO® Assurance 5+Life Warranty — Best Factory Warranty in Saltwater Boats
- NMMA® Certified
- Factory Leak Tested for Hull, Plumbing & Fitting Integrity
- Swim Platform w/ 4-Step Stainless Steel Ladder & Integrated Grab Handle
- Horn
- Hardtop w/ Powdercoated Frame, Integrated Tempered Safety Glass Panels, Dual Electronics Boxes, Spreader Lights & Aft Rod Holders
- Forward-Console Seat w/ Grab Handles
- Stainless Steel Steering Wheel w/ Knob
- Tilt Hydraulic Mercury® Power Assist Steering
- Binnacle-Mounted Digital Throttle & Shift (DTS) Controls
- 8" Sharktooth™ Digital Display
- Easy Access to Helm Electronics, Instruments & Switches
- Extra-Large Electronics Mounting Surface
- 2 Drink Holders
- 12V DC & 5V USB Charging Outlets
- Integrated Full-Width Footrest
- Recessed Catch-All w/ Color-Coordinated Soft Mat
- Side Access Door w/ Integrated Smoked Acrylic Window
- Integrated Entry Step
- Fiberglass Headliner
- Battery Storage
- Main Distribution Panel & Console Rigging Access
- Courtesy Light
- Powdercoated Aluminum Leaning Post w/ Integrated Grab Handles & 4 Rod Holders
- Dual Seat w/ Flip-Up Bolsters
- High-Density Marine-Grade Vinyl Upholstery w/ Stain-Resistant Coating & Composite Substrates
- Yacht-Style Non-Skid Surfaces Throughout
- 360° Coaming Bolsters
- Anchor Locker
- Port & Starboard Forward Seats w/ Storage & Overboard Drains
- Forward In-Deck Storage (fits 5-gal. bucket)
- Fishbox Macerators
- Low-Profile Powdercoated Aluminum Bow Rails
- Port & Starboard Under-Gunnel Rod Racks for 4 Rods
- 2 Aft Gunnel-Mounted 15° Rod Holders
- 3 Stern-Mounted Rod Holders
- Stern 18-Gal. Baitwell
- Stern Seating w/ Removable Totes & Bilge Access Below
- Six 8" Polished Marine-Grade Stainless Steel Pull-Up Cleats
- Legendary Dry-Riding MAKO® Hull
- Aggressive Deep V Hull Design (19° Transom Deadrise)
- Performance Lifting Strakes
- Factory-Matched Stainless Steel Propeller(s)
- MAKO® Bone White Gelcoat (Standard Color)
- 100% Composite Construction
- Transom w/ 100% Fiberglass-Encapsulated Coosa® Composite
- Hull/Deck Joint Chemically Sealed & Bonded 360° & Mechanically Fastened Every 6" w/ 316 SS Fasteners
- 1-Piece Molded Fiberglass Stringer Grid w/ Integrated Transom Knee Supports
- Stringer Grid Foam-Injected for USCG-Approved Flotation & Sound Deadening
- Heavy-Duty Rub Rail w/ Stainless Steel Insert
- Premium Marine-Grade Stainless Steel Hardware & Fasteners
- Closed-Molded Hatch Covers w/ Finished Undersides & Integrated Gaskets
- Composite Backing Plates for Cleats
- Bilge Access Hatch
- 2,000 GPH Bilge Pump w/ Automatic Switch
- 1,000 GPH Baitwell Pump
- High-Speed Raw Water Intake
- USCG-Compliant Navigation Lights
- 4 Cockpit Courtesy Lights & 1 Interior Light
- Marelon® Corrosion-Free Seacocks on All Below-Water Thru-Hull Fittings
- Heavy-Duty Electrical Switching System
- Labeled, Tinned-Copper Wiring for Easy Maintenance & Marine Protection

The Verdict
Sea Fox 248 Commander is the smarter buy if you fish NC nearshore and inshore and want a quality 24-foot center console with a 30-gallon livewell and Lifetime warranty at $10,000 less. Mako 254 CC earns its $110,000 premium if you fish offshore regularly — 21° deadrise, 156 gallons of fuel, and the MAKO Assurance 5+LIFE warranty package are genuinely strong arguments. For most NC coastal anglers, Sea Fox delivers 90% of the capability at 77% of the price. For dedicated offshore anglers, Mako’s offshore-focused design is worth the extra cost.
Key Takeaways
~$100,000 vs. ~$110,000. For NC nearshore fishing, Sea Fox delivers everything needed at 77% of the Mako price.
Sharper V hull handles offshore head seas more smoothly. For regular offshore runs, Mako’s extra deadrise is a genuine advantage.
Significantly more offshore range. For Gulf Stream and offshore runs, Mako’s fuel advantage matters.
One of the best production boat warranties in the industry. Genuinely strong coverage that adds resale value.
Published standard spec. Mako does not publish livewell capacity. Sea Fox wins on documented livewell performance.
Why Buyers Cross-Shop These Boats
Both are single-engine 24–25 foot center consoles rated to 300 HP. The cross-shop comes down to price and offshore capability:
- Price: Sea Fox 248 Commander ~$100,000; Mako 254 CC ~$110,000. Sea Fox costs $10,000 less.
- Deadrise: Mako 21° vs Sea Fox 18°. Mako's sharper V handles offshore chop better.
- Fuel: Mako 156 gallons vs Sea Fox 109 gallons. Mako carries 47 more gallons — significantly more offshore range.
- Warranty: Mako ASSURANCE 5+LIFE (Lifetime + 5-yr + 3-yr, all transferable) vs Sea Fox Lifetime Structural + 5-yr blister. Both strong; Mako’s 5-yr stem-to-stern is broader.
- Livewell: Sea Fox publishes a 30-gallon livewell as standard. Mako does not publish livewell capacity.
Come to Avalanche Motorsports in Washington, NC. We will give you a straight answer on which one fits your fishing.
Sea Fox vs. Mako: Price and Value
As the #1 Sea Fox dealer in the USA, we have this conversation every week. Here is what the numbers show.
254 CC
Starting at ~$100,000 depending on engine selection and options. A fully rigged, sea-ready 254 CC with electronics, outboards, and trailer will land most buyers above this figure.
248
Starting at ~$100,000 ° $10,000 less than the 254 CC at ~$110,000. Even rigged comparably, Sea Fox delivers more for less here.
The monthly payment difference is roughly $71/mo ° Sea Fox costs less here. Here is what you give up at the lower price point:
- 31 more gallons (140 vs 109) on the 254 CC
- Warranty: Lifetime Limited Structural + 10-yr transferable + 5-yr blister on Sea Fox vs 5+Life on Mako
- Livewell: Sea Fox ships with a 30 gal
Run the Numbers Yourself
Adjust the prices, down payment, rate, and term to see what the gap actually costs you every month.
Estimates for comparison only, before tax, title, registration, and fees. Not a financing offer or quote - rates and terms depend on credit approval. Call (252) 946-0920 for current offers.
Build Quality: Sea Fox vs. Mako
Both the Sea Fox 248 Commander and Mako 254 CC are all-composite center consoles built for saltwater use. Build quality is comparable — the differences are in warranty depth, hull geometry, and spec priorities.
Construction
MAKO Marine boats are produced by White River Marine Group - a Bass Pro Shops subsidiary - at manufacturing facilities in Flippin, Arkansas. The brand builds its hulls and decks using open-mold fiberglass construction with a closed-cell polyurethane foam stringer grid system encapsulated in fiberglass, eliminating wood from the stringer and transom assemblies. MAKO produces a broad range of center consoles, bay boats, and inshore models in the volume market segment.
MAKO public quality page confirms the foam stringer grid system and wood-free transom but does not publish resin type, barrier coat details, or specific laminate schedules. Construction detail transparency is limited compared to brands that publish full laminate specifications.
MAKO strongest documented attribute is its MAKO Assurance 5+LIFE warranty program: a lifetime limited structural hull warranty, 5-year stem-to-stern coverage, and a 3-year gelcoat warranty - all transferable to subsequent owners. This is among the most comprehensive warranty packages in the mid-range center console segment and directly supports resale value.
How Sea Fox Builds the 248 Commander Hull
Sea Fox builds the 248 Commander at their 200,000 sq ft factory in Moncks Corner, South Carolina. The hull is designed by a naval architect and the plug is CNC cut on a five-axis router before molds are pulled. Construction from the outside in:
- Isothalic gelcoat — outer skin. Denser molecular structure than standard orthophthalic gelcoat; superior UV degradation resistance and osmotic blister resistance.
- Vinyl ester barrier coat — low water absorption rate, the technical reason the 5-year blister warranty exists.
- Hand-laid 36/10 oz fiberglass knit — 36-oz woven + 10-oz mat, hand rolled layer by layer into the mold.
- 1708 fiberglass knit — used specifically in deck radius areas for strength and minimal flex at high-stress joints.
- No Wood, No Rot all-composite construction foam-filled stringers — custom CAD-designed per model, closed-cell foam core, bonded directly to cockpit sole. Closed-cell = sealed system; adds positive flotation even if gelcoat is breached.
- Penske foam-core transom with glassed-in aluminum motor plate — zero wood; aluminum plate spreads engine load across the full transom width.
- High-density foam-cored deck — chemically bonded hull-to-deck joint; no mechanical fasteners = no leak path at the seam.
- Closed-cell foam flotation throughout — meets and exceeds USCG Level Flotation requirements.
Warranty: Limited Lifetime Structural (original owner) → 10-year transferable (second owner) → 5-year blister (prorated) → 3-year deck hardware → 2-year electrical/plumbing. At 10+ years in saltwater service, properly maintained Sea Fox hulls show excellent gelcoat retention and structural integrity.
Direct From Sea Fox — Highlighted Features

Pressurized Livewell
30-gal tournament-style pressurized livewell with aquarium window and 800 GPH aerator.

Fusion Apollo Stereo
Marine-grade Fusion Apollo stereo included standard.

Limited Lifetime Hull Warranty
Lifetime structural warranty transferable to subsequent owners.

Aft Bench Seat
Removable cushion aft bench seat adapts from family seating to open fishing cockpit.

Tech Pack
Mood lighting, underwater lights, courtesy lighting, and wireless charging in one add-on.

Garmin 943XSV
9-inch touchscreen with SideVu, ClearVu, and CHIRP sonar.

Watersports Pack
Air station, stainless ski tow bar, and boarding platform.
Photos courtesy Sea Fox Boats.
Side-by-Side Specs: 248 vs. 254 CC
→ Swipe table to see full comparison
| Spec | Sea Fox 248 Commander | Mako 254 CC |
|---|---|---|
| LOA | 24'4" | 24'4" |
| Beam | 8'6" | 8'6" |
| Deadrise | 18° | 19° |
| Fuel Capacity | 109 gal | 140 gal |
| Max HP | 300 HP | 350 HP |
| Draft | 14" | 17" |
| Dry Weight | 3,793 lbs | 4,400 lbs |
| Person Capacity | 10 | 12 |
| Livewell | 30 gal | — |
| Hull Warranty | Lifetime Limited Structural + 10-yr transferable + 5-yr blister | 5+Life |
| MSRP (Starting) | $100,000 | $110,000 |
| Price Difference | ~$10,000 less than Mako 254 CC | — |
| Monthly Payment (~240 mo) | ~$716/mo | ~$787/mo |
Speak directly with the #1 Sea Fox dealer in the USA — Washington, NC
Ready to See It In Person?
21 Sea Fox 228 Commanders In Stock — Washington, NC
We're the #1 Sea Fox dealer in the USA. Schedule a sea trial on Pamlico Sound — same week, no pressure.
Who Should Buy Sea Fox vs. Mako: Match the Right Boat to Your Needs
Choose 248C if…
- You want to work with the #1 Sea Fox dealer in the USA — local service and warranty support in Washington, NC
- Financing: ~$716/mo vs. ~$787/mo — comparable monthly, more standard equipment on Sea Fox
Choose Mako if…
- You trade boats every 3–5 years and brand resale value matters
- Brand prestige and established track record are priorities
- You have owned Mako before and know the product
Everything Buyers Ask: Frequently Asked Questions
Select a category below to view common questions and our honest answers.
Price & Value
The price gap, and who each boat is honestly right for.
The $110,000 gap buys three things from Mako: more deadrise (21° vs 18° — better offshore ride), significantly more fuel (156 vs 109 gal — 47 more gallons), and the MAKO Assurance 5+LIFE warranty package (Lifetime structural + 5-year stem-to-stern + 3-year gelcoat, all transferable). Sea Fox counters with a 30-gallon livewell and lower entry price. If offshore range and ride quality are your priorities, Mako earns its premium. For NC nearshore anglers who fish within 20–30 miles, Sea Fox delivers everything needed at $30K less.
At $0 down, 240 months, 5.99% APR: Sea Fox 248 Commander is approximately $716/mo; Mako 254 CC is approximately $931/mo. About $215/mo more for the Mako. On approved credit.
What You Get With Sea Fox for Less
18° Carolina Flare hull, 109-gal fuel, built for the waters Carolina buyers actually fish.
All-composite construction with a Limited Lifetime Hull Warranty. Zero wood. Ever.
30 gal, In-floor fish boxes, 9 rod holders — standard.
Net depreciation per year is roughly equal — at a far lower entry price.
Fuel & Range
Fuel capacity, range, and what it means on the water.
Mako 254 CC carries 47 more gallons than Sea Fox 248 Commander — nearly 50% more fuel. For an offshore-focused boat targeting bluewater fishing 40+ miles offshore, that range matters significantly. Sea Fox’s 109-gallon tank is more than adequate for NC nearshore fishing within 20–30 miles. If you fish far offshore frequently, Mako’s fuel capacity is a practical advantage.
Both boats run single outboards up to 300 HP. Sea Fox 248 Commander at 3,793 lbs is 307 lbs lighter than Mako 254 CC at 4,100 lbs — lighter hull typically means slightly better fuel economy at cruise. Mako’s larger tank more than compensates on range. Both are efficient at comparable speeds with a single engine.
Real-World Range Comparison
248
254 CC
248 delivers ~327 miles vs. ~210 for the 254 CC. The 254 CC's larger 140-gal tank feeds 2 engines ° tank size alone does not tell the range story.
Range estimates at cruising speed. Single-engine ~3 mpg • twin-engine ~1.5 mpg • triple ~1.1 mpg. Actual range varies with load, sea state, and speed.
Hull & Performance
Hull design, ride quality, and offshore capability.
Mako 254 CC has 21° deadrise — 3° more than Sea Fox 248 Commander at 18°. Higher deadrise means a sharper V hull that cuts through offshore head seas more smoothly. For regular offshore runs in mixed conditions, Mako’s extra deadrise is a genuine ride quality advantage. For inshore and typical nearshore NC fishing, Sea Fox’s 18° provides excellent stability and performance.
Mako 254 CC is the stronger offshore platform: 21° deadrise, 156 gallons of fuel (47 more than Sea Fox), and Mako’s reputation for bluewater hull engineering. For Gulf Stream runs and regular offshore fishing beyond 20–30 miles, Mako has a meaningful edge. Sea Fox 248 Commander handles nearshore and occasional offshore runs well but Mako is built with a more offshore-focused design philosophy.
A single Yamaha F300 on either boat provides excellent performance — typically 48–53 mph WOT. For NC nearshore and offshore fishing within 30–40 miles, a single 300 HP is practical and reliable. For regular Gulf Stream runs, some anglers prefer twin-engine redundancy. Neither the Sea Fox 248C nor the Mako 254 CC is a twin-engine platform — if redundancy is critical, consider stepping up to a twin-engine boat.
Hull Design Compared
248
- Modified-V ° balanced chop and stability
- Carolina Flare ° outward flare deflects spray for a drier cockpit
- 14" draft ° runs inshore NC water the 254 CC cannot reach
- 8'6" beam ° narrower ° better speed efficiency
254 CC
- Modified-V ° balanced chop and stability
- 8'6" beam ° narrower hull
- 17" draft ° deeper than 248 ° some NC inshore areas inaccessible
- 254 CC has a sharper entry (19° vs 18°) ° better in offshore chop
248 drafts 3" less than the 254 CC ° that is the difference between running the Pamlico Sound flats and having to anchor offshore. For NC inshore fishing, shallow draft is not a minor spec.
Construction & Quality
How each boat is built and what that means long-term.
MAKO Assurance 5+LIFE is one of the most comprehensive production boat warranties in the industry: Lifetime structural hull warranty + 5-year stem-to-stern coverage + 3-year gelcoat warranty, all transferable to second owners. Sea Fox offers a Limited Lifetime Structural Hull Warranty + 5-year blister. Both have lifetime hull coverage. Mako’s 5-year stem-to-stern is broader overall coverage; Sea Fox’s 5-year blister is more specific to hull integrity. Mako’s comprehensive warranty package is genuinely impressive and a real value at the $130K price point.
Yes — Sea Fox 248 Commander ships with a 30-gallon livewell as published standard equipment. Mako lists a livewell as standard on the 254 CC but specific capacity and pressure specs are not publicly posted. For live bait fishing and tournament use, Sea Fox’s 30-gallon published spec is a concrete advantage.
Built to Last: Construction Compared
248
- Isothalic Gelcoat outer layer ° UV and scratch resistance
- Vinyl Ester Barrier ° blocks osmotic blistering
- All-composite, foam-filled ° zero wood in the structure
- Lifetime structural
254 CC
- 100% composite construction ° no wood in structural components
- Composite construction
- Foam-filled hull sections for flotation
- MAKO Assurance 5+Life
Sea Fox uses Isothalic Gelcoat + Vinyl Ester Barrier ° a specific combination that resists osmotic blistering. Both are all-composite builds. The warranty difference is meaningful if you plan to keep the boat 7+ years or resell it ° a lifetime warranty transfers and supports resale value.
Family & Capacity
Comfort, seating, and family-friendly features.
Both are excellent 24–25 foot single-engine center consoles for NC coastal fishing. Sea Fox 248 Commander at $100K with a 30-gallon livewell and Lifetime warranty is the better value for inshore through nearshore fishing. Mako 254 CC at $130K with 156 gallons and 21° deadrise is the better choice for regular offshore runs and bluewater fishing. Your fishing use case determines which is right.
Sea Fox 248 Commander at 3,793 lbs dry is at the upper limit for a properly rated half-ton. Mako 254 CC at 4,100 lbs dry requires a ¾-ton truck. The 307-lb weight difference is modest but meaningful at the ramp. Factor the tow vehicle into your total cost comparison.
Family Day on the Water
248
- Aft bench seat (removable) ° open cockpit for fishing, seating when not
- Forward bow seating with contoured backrests
- Half-ton towable (F-150, Ram 1500) ° easier day-trip logistics
- 14" draft ° shallow enough for calm inshore spots
254 CC
- Wider beam ° more stable at anchor for non-anglers
- Fold-down transom seating and bow seating standard
- Half-ton towable
- 17" draft
Center consoles are designed around rods, livewells, and fish boxes. Families fit comfortably on either boat for a day on the water ° but if family comfort is the primary use case rather than fishing, a dual console or deck boat is worth a look. If you fish hard and bring the family along, both handle it well.
Resale & Ownership
Long-term value, resale, and ownership costs.
Mako holds strong resale, particularly in the offshore fishing community. Mako’s transferable 5+LIFE warranty is a documented resale advantage — second buyers know exactly what coverage they inherit. Sea Fox holds strong resale in the Southeast coastal market with its transferable Lifetime hull warranty. Both are well-regarded brands in the used-boat market.
Probably not. If you fish offshore only a few times a year and primarily do NC nearshore and inshore fishing, Sea Fox 248 Commander delivers everything you need at $10,000 less. The Mako’s offshore advantages — extra deadrise, more fuel, more powerful warranty package — are most valuable to frequent offshore anglers. Buy based on how you actually fish, not aspirational offshore trips you might take someday.
Real Cost of Ownership
248
- $10,000 lower purchase price ° less capital at risk
- Half-ton truck (F-150, Ram 1500) ° no truck upgrade needed
- Lifetime hull warranty transfers to new owner ° supports resale
- Lower price = lower insurance premium and loan balance
254 CC
- Higher purchase price ° more capital tied up in the asset
- Half-ton truck ° 607 lbs heavier than 248
- Higher nominal resale dollars (but percentage depreciation is comparable)
- Higher insurance and financing costs at purchase price
248 is 607 lbs lighter ° that is often the difference between keeping your existing half-ton truck or buying a 3/4-ton to own the 254 CC. Factor that into total cost of ownership. Lower purchase price also means lower insurance premiums and lower loan exposure.
Financing
Payments, rates, and how to structure the purchase.
At $100K–$130K, $110,000 is roughly 30% of the Sea Fox price — a meaningful gap. On a 240-month loan, it translates to about $215/mo more. Over 20 years that is roughly $51,600 in total additional payments. Whether Mako’s offshore advantages justify that gap depends entirely on how often and how far you fish offshore.
Cost Comparison at a Glance
Real money over a 20-year loan — trailer, electronics, or a decade of outboard service.
The lower monthly payment is cited in 80%+ of those conversations at our dealership.
Our team walks you through the actual ownership math, not just the sticker.
Run the numbers honestly, decide what matters, and make the call with confidence.
Dealer & Service
Why Avalanche Motorsports is the right choice.
No — Avalanche Motorsports is a Sea Fox dealer in Washington, NC. We sell and service Sea Fox only. We give you an honest comparison of both boats. Come to our location and we will put you on the Sea Fox 248 Commander for a real test drive.
Sea Fox is built in Conway, South Carolina. Mako is built in Wichita, Kansas (owned by Brunswick Corporation). Sea Fox is a Carolinas-built boat designed for NC coastal conditions; Mako is a national production brand with strong offshore fishing heritage built across multiple Brunswick facilities.
Why Buy From Avalanche Motorsports?
Deepest inventory and product knowledge in the country.
We ship boats, arrange transport, and support buyers across the country.
Certified technicians, pre-purchase inspections, and genuine parts.
Support before, during, and long after delivery — we've got your back.
Tue–Fri 8am–5:30pm · Sat 8am–2pm EST · Serving Manteo, Morehead City, and buyers as far as Virginia Beach and beyond.
Sea Fox 248: Built for NC Waters
Sea Fox 248 Commander — built in Moncks Corner, SC with a lifetime structural warranty, vinylester barrier coat, and No Wood, No Rot all-composite construction stringers. Priced from $100,000 at Avalanche Motorsports.
We sell Sea Fox. We don't sell Mako. Factor that in — and read anyway, because we're going to be straight with you.
Mako 254 CC — a capable boat from Mako, priced from $110,000. Solid choice if you prefer their dealer network, but Sea Fox wins on build transparency, warranty transferability, and delivered value at Avalanche.
Open Tue–Fri 8am–5:30pm · Sat 8am–2pm EST · Sea Fox boats in NC
Interested in a Sea Fox? Get a Quote on the Sea Fox 248 Commander
Explore More Sea Fox Resources
Helpful guides, comparisons, and model information to help you make the right decision.
Other Sea Fox Models to Consider
View All Sea Fox Models →248 Comparisons
Every head-to-head comparison we've built for this model.
- 248 Commander vs. Cobia 245 CC
- 248 Commander vs. Grady-White Fisherman 236
- 248 Commander vs. Grady-White Freedom 255
- 248 Commander vs. Key West 239 FS
- 248 Commander vs. Mako 246 CC
- 248 Commander vs. Mako 254 CCYou're Here
- 248 Commander vs. NauticStar 242 OS
- 248 Commander vs. Robalo R250
- 248 Commander vs. Sea Fox 268 Commander
- 248 Commander vs. Sea Hunt Ultra 235SE
- 248 Commander vs. Sea Hunt Ultra 245SE
- 248 Commander vs. Sportsman Heritage 231
- 248 Commander vs. Sportsman Heritage 251
- 248 Commander vs. Tidewater 232 CC
- 248 Commander vs. Tidewater 252 CC
- 248 Commander vs. Tidewater 256 CC
Do Your Homework
The research that answers "am I making the right call?"
- Sea Fox Hull Design & Construction
- Sea Fox Build Process (Behind the Glass)
- Sea Fox Lifetime Hull Warranty — What It Covers
- 248 Specs & Pricing
- Sea Fox Isothalic Gelcoat — Why It Matters
- Are Sea Fox Boats Good?
- Are Sea Fox Boats Worth the Money?
- Are Sea Fox Boats Reliable?
- Are Sea Fox Boats Good Offshore?
- How Long Do Sea Fox Boats Last?
- What Is Deadrise?
Own With Confidence
Financing, towing, rigging — everything after the handshake.
2287 W. 5th St., Washington, NC 27889
Tue-Fri 8am-5:30pm · Sat 8am-2pm EST
- Largest Selection
- Fast Delivery
- Factory Certified
- Parts & Service
- Expert Support
- Family Owned
Avalanche Motorsports - Washington, NC - #1 Sea Fox Dealer USA
We're a 20+ year old dealership serving boaters across Eastern NC and beyond. Our team lives and breathes boating and we're here to help you find the perfect Sea Fox for your adventures.
Coastal Ride Rating System
How we score hull performance across 5 dimensions
Every boat on this site is rated using the same engineering principles — deadrise angle, beam, draft, flare type, and weight. The result is a fair, data-driven comparison based on published specs, not marketing claims.
1 — Chop Penetration
How well the hull cuts through 2–3 ft coastal chop at cruising speed. Driven by: deadrise angle (higher = cuts better), entry angle, and weight. Matters most on Pamlico Sound and coastal inlets.
2 — Offshore Swell Comfort
How the boat handles 4+ ft ocean swells. Driven by: deadrise (deeper V softens impact), waterline length, and beam. Matters on Gulf Stream runs from Oregon Inlet and Beaufort.
3 — Spray & Dryness
How dry the cockpit stays in rough water. Driven by: flare type (Carolina flare deflects spray outboard — the biggest factor), freeboard, and trim tabs. Standard on Sea Fox, optional on most competitors.
4 — Shallow Water Access
Ability to navigate shallow inlets, tight bays, and flats. Driven by: draft (less = better) and beam (wider beam adds stability in thin water). NC anglers fish both deep and shallow in the same trip.
5 — Stability at Rest
Comfort when anchored or idle. Driven by: beam (wider = more stable), deadrise (shallower V is steadier at anchor), and draft. Matters when you’re anchored up waiting for a bite.
Score scale
Scores reflect hull-geometry performance potential from published specs. Actual performance varies with load, sea state, and engine package.
ⓘ Pricing estimates as of October 2026. Sea Fox 248 Commander: ~$100,000+ based on current Avalanche Motorsports inventory. Mako 254 CC: ~$110,000+ based on published dealer prices. Excludes tax, title, registration, and fees.












